American Autowire - 1960 Engine Wire Harness-GM Truck - 38038
$130.15
DESCRIPTION
American Autowire - 1960 Engine Wire Harness-GM Truck - 38038
Restore your classic Chevy truck's engine wiring with this 1960 Chevrolet 6-Cylinder Engine Wiring Harness from American Autowire.
Designed specifically for 1960 Chevrolet trucks equipped with a six-cylinder engine and factory gauges, this Factory Fit replacement harness provides an original-style solution for replacing deteriorated engine compartment wiring.
After decades of exposure to heat, vibration, moisture, and previous electrical repairs, original wiring can become brittle, cracked, or corroded. Replacing an aging harness helps restore electrical connections while maintaining your truck's original wiring configuration.
American Autowire manufactures its Factory Fit harnesses according to original General Motors specifications. Each harness arrives fully assembled and taped, connects at the original firewall location, and follows factory-style routing through the engine compartment.
Whether you're restoring a 1960 Chevy C10, replacing damaged engine wiring, or maintaining the original electrical system in your six-cylinder pickup, this harness provides a replacement designed for your truck's factory configuration.
Manufacturer: American Autowire
Manufacturer Part Number: 38038
Product Type: Engine Wiring Harness
Product Line: Factory Fit
Vehicle Year: 1960
Vehicle Application: Chevrolet Trucks
Engine Application: Six-Cylinder
Instrumentation: Factory Gauges
Ignition Configuration: Original-Style Points Ignition
Quantity: Sold Individually
Features
-
Designed for 1960 Chevrolet truck applications
-
Specifically intended for six-cylinder engines
-
Compatible with factory-gauge instrumentation
-
Manufactured by American Autowire
-
Part of the Factory Fit original reproduction wiring line
-
Manufactured according to original GM specifications
-
Fully assembled and taped
-
Connects at the original firewall location
-
Follows factory-style engine compartment routing
-
Intended for original-style ignition wiring
-
Helps replace aging, damaged, or previously modified engine wiring
-
Ideal for classic Chevrolet truck restorations
Vehicle Fitment
1960 Chevrolet C-Series – 2WD Trucks
Potential applications include:
-
1960 Chevrolet C10
-
1960 Chevrolet C20
-
1960 Chevrolet C30
1960 Chevrolet K-Series – 4WD Trucks
Potential applications include:
-
1960 Chevrolet K10
-
1960 Chevrolet K20
Required Vehicle Configuration
This harness is intended for trucks equipped with:
-
1960 Chevrolet truck electrical configuration
-
Six-cylinder engine
-
Factory-gauge instrumentation
-
Original-style ignition system
-
Compatible factory firewall wiring connections
Important: American Autowire lists part 38038 for 1960 Chevrolet trucks with six-cylinder engines and factory gauges. Verify your specific truck model, engine, instrumentation, and original electrical connections before ordering.
Designed for Six-Cylinder Engines
The engine configuration is an important fitment requirement for American Autowire part 38038.
Six-Cylinder Engine Application
This harness is designed for 1960 Chevrolet trucks equipped with six-cylinder engines.
Six-cylinder and V8 engines can have different electrical component locations, wiring lengths, and routing requirements.
Selecting the correct engine harness helps maintain compatibility with your truck's original electrical system.
What If My Truck Has a V8 Engine?
American Autowire offers separate engine wiring harnesses for 1960 Chevrolet V8 applications.
These include configurations for standard V8 engines and the 348 cubic-inch V8.
If your truck has been converted from a six-cylinder to a V8, verify the wiring requirements of the installed engine before ordering.
Designed for Factory Gauge Instrumentation
One of the most important fitment requirements for part 38038 is the truck's original instrumentation.
Factory Gauges
This harness is designed for 1960 Chevrolet trucks equipped with factory gauges.
Factory-gauge systems can use different sending units and electrical connections than trucks equipped with warning lights.
What If My Truck Has Warning Lights?
American Autowire offers part 38030 for 1960 Chevrolet six-cylinder trucks equipped with factory warning lights.
If your truck does not have factory gauges, verify whether part 38030 is the appropriate replacement.
Why Does Instrumentation Matter?
Choosing the correct harness helps maintain compatibility with your truck's original engine monitoring system.
If your truck has undergone an instrument cluster conversion, verify its current wiring configuration before ordering.
Designed for Original-Style Points Ignition
Part 38038 is a standard Factory Fit engine wiring harness rather than an HEI-modified version.
Conventional Points Ignition
Original 1960 Chevrolet trucks used conventional breaker-point ignition systems.
These systems typically incorporate resistance in the ignition coil feed circuit to help protect the ignition points during normal operation.
American Autowire explains that original-style engine harnesses for points-ignition vehicles use resistance in the ignition feed circuit.
What If My Truck Has HEI Ignition?
If your six-cylinder engine has been converted to HEI electronic ignition, verify compatibility before ordering.
HEI systems generally require a suitable 12-volt ignition feed rather than the original points-ignition resistance-wire arrangement.
American Autowire recommends using an HEI-modified harness when available for vehicles converted to electronic ignition.
Part 38038 is not specifically identified as an HEI-modified harness.
Original-Style Factory Fit Construction
Manufactured to Original GM Specifications
American Autowire manufactures its Factory Fit engine harnesses according to original General Motors specifications.
This helps maintain the original-style electrical layout of your classic Chevrolet truck.
Fully Assembled and Taped
Each harness arrives fully assembled and taped.
This eliminates the need to construct an engine wiring harness from individual wires and terminals.
Original Firewall Connection
The harness is designed to connect at the factory firewall location.
Factory-Style Engine Compartment Routing
The harness follows original-style routing through the engine compartment, helping maintain a factory-style appearance.
What Does an Engine Wiring Harness Connect?
American Autowire explains that engine harness circuits vary depending on the model year and application.
Depending on the vehicle, an engine harness may contain wiring associated with:
-
Ignition system
-
Starter
-
Heater blower
-
Engine temperature sending unit
-
Oil pressure sending unit
Important: Not every circuit is included in every harness. Some vehicles use mechanical instruments that do not require electrical sender wiring.
Consult your factory service manual or American Autowire to confirm the exact connections included with part 38038.
Why Replace Your 1960 Chevy Truck's Engine Wiring Harness?
Replace Deteriorated Original Wiring
Engine compartment wiring is exposed to heat, vibration, moisture, and contaminants.
Over time, insulation can crack, terminals can corrode, and electrical connections can deteriorate.
Restore Original-Style Electrical Connections
An application-specific replacement harness helps maintain the electrical configuration intended for your truck.
Preserve Factory Gauge Compatibility
For trucks equipped with a six-cylinder engine and factory gauges, selecting the correct harness helps maintain compatibility with the original instrumentation.
Maintain a Factory-Style Appearance
American Autowire's Factory Fit harnesses are designed for restorations where original-style wiring and routing are important.
Important Fitment & Installation Information
-
Designed for 1960 Chevrolet truck applications only.
-
Specifically intended for six-cylinder engines.
-
Requires factory-gauge instrumentation.
-
Intended for original-style ignition wiring.
-
Not specifically modified for HEI ignition.
-
V8 applications require a different engine harness.
-
Trucks equipped with factory warning lights may require part 38030.
-
Verify compatibility if your truck has undergone an engine swap.
-
Confirm original firewall connections before ordering.
-
This is an engine wiring harness, not a complete vehicle wiring kit.
-
Front lighting, dash, and rear lighting harnesses are separate components.
-
Consult your factory service manual for installation instructions.
Frequently Asked Questions
Will this engine wiring harness fit my 1960 Chevy C10?
Yes, provided your 1960 Chevrolet C10 has a compatible six-cylinder engine, factory gauges, and the correct original-style electrical connections.
Does this harness fit a 1961 Chevy C10?
No. American Autowire lists part 38038 specifically for 1960 Chevrolet trucks.
What engine is this harness designed for?
This harness is specifically designed for six-cylinder Chevrolet truck applications.
What is the difference between American Autowire 38030 and 38038?
Both harnesses are intended for 1960 Chevrolet trucks with six-cylinder engines.
The difference is the instrumentation:
-
38030: Factory warning lights
-
38038: Factory gauges
Will this harness fit a V8 engine?
No. Part 38038 is intended for six-cylinder applications.
Will this harness work with factory warning lights?
No. Part 38038 is designed for factory gauges.
Is this harness designed for HEI ignition?
No. Part 38038 is not identified as an HEI-modified harness.
If your truck has been converted to electronic ignition, verify the appropriate wiring requirements before ordering.
Does this harness come assembled?
Yes. American Autowire Factory Fit engine harnesses arrive fully assembled and taped.
Where does this harness connect?
It is designed to connect at the original firewall location and follow factory-style routing through the engine compartment.
Will this fit a 1960 GMC pickup?
American Autowire lists part 38038 for Chevrolet trucks. GMC compatibility has not been confirmed by the manufacturer.
Does this replace the entire truck wiring system?
No. This product replaces the engine wiring harness. Other vehicle wiring harnesses are separate components.
Restore Your 1960 Chevy Truck's Engine Wiring
Whether you're restoring a classic C10, replacing deteriorated engine wiring, or preserving the original electrical configuration of your six-cylinder Chevrolet pickup, the American Autowire 38038 Engine Wiring Harness provides an original-style replacement designed for your truck.
Find the wiring harnesses, electrical components, and restoration parts you need at Tuckers Classic Auto Parts.
Helping Keep Classic Trucks on the Road Since 1993.