American Autowire - 1960 Engine Wire Harness-GM Truck - 38031
$130.15
DESCRIPTION
American Autowire - 1960 Engine Wire Harness-GM Truck - 38031
Restore your classic Chevy truck's engine wiring with this 1960 Chevrolet V8 Engine Wiring Harness from American Autowire.
Designed for 1960 Chevrolet trucks equipped with a V8 engine and factory gauges, this Factory Fit replacement harness provides an original-style solution for replacing worn, damaged, or deteriorated engine compartment wiring.
After decades of exposure to engine heat, vibration, moisture, and previous electrical repairs, original wiring can become brittle, cracked, or corroded. Replacing an aging harness helps restore electrical connections while maintaining your truck's original wiring configuration.
American Autowire manufactures its Factory Fit harnesses according to original General Motors specifications. Each harness arrives fully assembled and taped, connects at the original firewall location, and follows factory-style routing through the engine compartment.
Whether you're restoring a 1960 Chevy C10, replacing damaged engine wiring, or maintaining the original electrical system in your V8-powered pickup, this harness provides an application-specific replacement designed for your truck.
Manufacturer: American Autowire
Manufacturer Part Number: 38031
Product Type: Engine Wiring Harness
Product Line: Factory Fit
Vehicle Year: 1960
Vehicle Application: Chevrolet Trucks
Engine Application: V8
Instrumentation: Factory Gauges
Ignition Configuration: Original-Style Points Ignition
Quantity: Sold Individually
Features
-
Designed for 1960 Chevrolet truck applications
-
Intended for V8 engines with factory gauges
-
Manufactured by American Autowire
-
Part of the Factory Fit original reproduction wiring line
-
Manufactured according to original GM specifications
-
Fully assembled and taped
-
Ready to install upon arrival
-
Connects at the original firewall location
-
Follows factory-style engine compartment routing
-
Designed for original-style ignition wiring
-
Helps replace aging, damaged, or previously modified engine wiring
-
Ideal for classic Chevrolet truck restorations
Vehicle Fitment
1960 Chevrolet C-Series – 2WD Trucks
Potential applications include:
-
1960 Chevrolet C10
-
1960 Chevrolet C20
-
1960 Chevrolet C30
1960 Chevrolet K-Series – 4WD Trucks
Potential applications include:
-
1960 Chevrolet K10
-
1960 Chevrolet K20
Required Vehicle Configuration
This harness is intended for trucks equipped with:
-
1960 Chevrolet truck electrical configuration
-
V8 engine
-
Factory-gauge instrumentation
-
Original-style ignition system
-
Compatible factory firewall wiring connections
Important: American Autowire lists part 38031 for 1960 Chevrolet trucks with V8 engines and factory gauges. Verify your specific engine, instrumentation, and electrical configuration before ordering.
Designed for V8 Engines
Chevrolet V8 Engine Application
Part 38031 is designed for 1960 Chevrolet trucks equipped with V8 engines.
Six-cylinder and V8 engines can have different electrical component locations, wiring lengths, and routing requirements.
Selecting the correct engine wiring harness helps maintain compatibility with your truck's original electrical system.
What If My Truck Has a 348 V8?
American Autowire also offers part 38032, which is specifically identified for 1960 Chevrolet trucks equipped with the 348 cubic-inch V8 and factory gauges.
If your truck has a 348 V8, verify whether part 38032 is the correct application before ordering.
What If My Truck Has a Six-Cylinder Engine?
American Autowire offers separate engine harnesses for six-cylinder applications.
Part 38031 should not be selected for a six-cylinder truck simply because the model year matches.
Designed for Factory Gauge Instrumentation
One of the most important fitment requirements for part 38031 is the truck's original instrumentation.
Factory Gauges
This harness is designed for 1960 Chevrolet trucks equipped with factory gauges.
Gauge systems can use different sending units and electrical connections than trucks equipped with warning lights.
What If My Truck Has Warning Lights?
American Autowire offers part 38037 for 1960 Chevrolet V8 trucks equipped with factory warning lights and original-style ignition.
For V8 trucks with factory warning lights that have been converted to HEI ignition, American Autowire offers part 38037H.
Why Does Instrumentation Matter?
Selecting the correct harness helps maintain compatibility with your truck's original engine monitoring system.
If your truck has undergone an instrument cluster conversion, verify its current wiring configuration before ordering.
Designed for Original-Style Points Ignition
Part 38031 is a standard Factory Fit engine wiring harness rather than an HEI-modified version.
Conventional Points Ignition
Original 1960 Chevrolet trucks used conventional breaker-point ignition systems.
These systems typically incorporated resistance in the ignition coil feed circuit to help extend the life of the ignition points.
What If My Truck Has HEI Ignition?
If your truck has been converted to HEI electronic ignition, verify compatibility before ordering.
HEI systems generally require a suitable 12-volt ignition feed rather than the resistance-wire arrangement used with conventional points ignition.
American Autowire recommends using an HEI-modified harness when available for vehicles converted to electronic ignition.
Part 38031 is not identified as an HEI-modified harness.
Original-Style Factory Fit Construction
Manufactured to Original GM Specifications
American Autowire manufactures its Factory Fit engine harnesses according to original General Motors specifications.
This helps maintain the original-style electrical layout of your classic Chevrolet truck.
Fully Assembled and Taped
Each harness arrives fully assembled and taped, eliminating the need to construct an engine wiring harness from individual wires and terminals.
Original Firewall Connection
The harness is designed to connect at the factory firewall location.
Factory-Style Engine Compartment Routing
The harness follows original-style routing through the engine compartment, helping maintain a factory-style appearance.
What Does an Engine Wiring Harness Connect?
Engine harness circuits vary depending on the vehicle's model year and equipment.
Depending on the application, an engine harness may contain wiring associated with:
-
Ignition system
-
Starter
-
Heater blower
-
Engine temperature sending unit
-
Oil pressure sending unit
Important: Not every circuit is included in every harness. Some vehicles use mechanical instruments that do not require electrical sender wiring.
Consult your factory service manual or American Autowire to confirm the exact connections included with part 38031.
Why Replace Your 1960 Chevy Truck's Engine Wiring Harness?
Replace Deteriorated Original Wiring
Engine compartment wiring is exposed to heat, vibration, moisture, and contaminants.
Over time, insulation can crack, terminals can corrode, and electrical connections can deteriorate.
Restore Original-Style Electrical Connections
An application-specific replacement harness helps maintain the electrical configuration intended for your truck.
Preserve Factory Gauge Compatibility
For trucks equipped with a V8 engine and factory gauges, selecting the correct harness helps maintain compatibility with the original instrumentation.
Maintain a Factory-Style Appearance
American Autowire's Factory Fit harnesses are designed for restorations where original-style wiring and routing are important.
Important Fitment & Installation Information
-
Designed for 1960 Chevrolet truck applications only.
-
Intended for V8 engines.
-
Requires factory-gauge instrumentation.
-
Designed for original-style ignition wiring.
-
Not specifically modified for HEI ignition.
-
Six-cylinder applications require a different harness.
-
Trucks equipped with factory warning lights require a different harness.
-
The 348 V8 has a separately listed harness, part 38032.
-
Verify compatibility if your truck has undergone an engine swap.
-
Confirm original firewall connections before ordering.
-
This is an engine wiring harness, not a complete vehicle wiring kit.
-
Front lighting, dash, and rear lighting harnesses are separate components.
-
Consult your factory service manual for installation instructions.
Frequently Asked Questions
Will this engine wiring harness fit my 1960 Chevy C10?
Yes, provided your 1960 Chevrolet C10 has a compatible V8 engine, factory gauges, and the correct original-style electrical connections.
Does this harness fit a 1961 Chevy C10?
No. American Autowire lists part 38031 specifically for 1960 Chevrolet trucks.
What engine is this harness designed for?
This harness is listed for Chevrolet V8 engine applications.
If your truck has a 348 V8, verify the separately listed part 38032.
What is the difference between American Autowire 38031 and 38032?
Both harnesses are associated with 1960 Chevrolet trucks equipped with V8 engines and factory gauges.
However, 38032 is specifically identified for the 348 V8, while 38031 carries a general V8 application.
Will this harness fit a six-cylinder engine?
No. Part 38031 is intended for V8 applications.
Will this harness work with factory warning lights?
No. Part 38031 is designed for factory gauges.
Is this harness designed for HEI ignition?
No. Part 38031 is not identified as an HEI-modified harness.
If your truck has been converted to electronic ignition, verify the appropriate wiring requirements before ordering.
Does this harness come assembled?
Yes. American Autowire Factory Fit engine harnesses arrive fully assembled and taped.
Where does this harness connect?
It is designed to connect at the original firewall location and follow factory-style routing through the engine compartment.
Will this fit a 1960 GMC pickup?
American Autowire lists part 38031 for Chevrolet trucks. GMC compatibility has not been confirmed.
Does this replace the entire truck wiring system?
No. This product replaces the engine wiring harness. Other vehicle wiring harnesses are separate components.
Restore Your 1960 Chevy Truck's Engine Wiring
Whether you're restoring a classic C10, replacing deteriorated engine wiring, or preserving the original electrical configuration of your V8-powered Chevrolet pickup, the American Autowire 38031 Engine Wiring Harness provides an original-style replacement designed for your truck.
Find the wiring harnesses, electrical components, and restoration parts you need at Tuckers Classic Auto Parts.
Helping Keep Classic Trucks on the Road Since 1993.